Ducati Owners Club Victoria

Club Services

Ducati Tools

Tools are borrowed by arrangement with the Club's Spares and Tools officer, please go to our contact us page and select 'Spares and Tools' from the list of contacts there.

Hire of the 8 Valve Shim Kit $50
Hire of the 4 Valve Shim Kit $30
Hire of Club Tools (Below) No Charge

Model Index

A - 750 GT / Sport / Green frame 750 SS (Round case)
B - 860 GT / GTS / 750 SS / 900 SS / Darmah (Early)
C - 900 SS / SD / Darmah (Bosch Ignition)
D - 350 / 500 / 500 Sport parallel twins
E - MHR Mille
F - 500 / 600 Pantah
G - 851 Tri-colour
H - 750 Sport (Belt drive)
J - 851
K - 900 SS (Belt drive)
Box 1      

No

Tool No

Description

Model Suitability

1 D067503210 Oil filter wrench G
1 D887005749 Crankcase assembling pin (camshaft) G
2 D887130101 Clutch locking wrench ABCE
1 D887130102 Valve spring compressor ABCD
3 D887130104 Chain pinion wrench (Two home made) ABCE
1 D887130105 Conical gear locking wrench (750 Distributor.) A
1 D887130107 Sprocket holding wrench 16 tooth ABCE
1 D887130108 Alternator locking wrench ABCF
1 D887130109/132 Advance checking pointer AC
1 D887130110 Flywheel primary gear puller ( 3" / 86 mm diameter primary gear.) A
1 D887130111 Lower bevel tower extractor ( 41 mm x 1 tpmm ) A

Box 2      

No

Tool No

Description

Model Suitability

1 D887130112 Timing disc holder AB
3 D887130113 Exhaust nut spanner (Two home made) ABCE
1 D887130114 Electrical pin extractor (molex, in Box 1 tray) BCEFG
1 D887130115 Chain tension tool (eccentric swing arm) BD
1 D887130117 Ignition generator rotor puller B
1 D887130119 Ignition setting pin (In Box 1 tray) B
3 D887130120/862 Rocker pin extractor (1 in shim kit)(Two home made) ABCDEFG
2 D887130123 Timing disc holder DEFG
1 D887130126 Advance checking pointer D
1 D887130130 Desmo cam lock BCE
1 D887130131 Ignition pick up assembling tool (own box) C
1 D887130132/109 Advance checking pointer (In Timing light box) AC
NA D887130133 Flywheel gear extractor ( 757 / 110 in lieu?) CEG
1 D887130134 Closing rocker spring tool (shim kit) CE
1 D887130136 Clutch drum locking tool F
2 D887130137 Primary drive locking tool FG
1 D887130138 Distribution pulley retaining wrench FG
2 D887130139 Timing pulley nut wrench F
1 D887130140 Chain sprocket retaining plate fitting tool F
1 D887130143 Closing rocker spring tool (In shim kit) F
    NA = No longer available from factory  

Box 3      

No

Tool No

Description

Model Suitability

1 D887130144 Chain & alternator cover removing tool G
2 D887130146 Clutch drum lock wrench G
1 D887130262 Rocker assembling pin (shim kit) ABCDE
1 D887130263 Camshaft lock wrench ABC
1 D887130270 Blind bearing extractor (Alt cover)6203 ABCE
NA No Duke tool Blind bearing extractor (Lay shaft) 6204 ABCE
2 D887130710 Alternator lock wrench EG
1 D887130743 Clutch locking ring wrench E
1 D887130757 Flywheel gear extractor CEG
1 D887130862/120 Rocker pin extractor G
1 D887651002 Computer check lamp'851' G
    NA = No longer available from factory  

Box 4      

No

Tool No

Description

Model Suitability

1 D887130250 Single magneto flywheel puller.  
1 D887130267 Single valve spring compressor.  
1 D887130269/70/71 Single timing bearing extractor.  

Belt Drive Desmo Tools & Shim Kit. (Own Box).

No

Tool No

Description

Model Suitability

1 D887005644 Cam belt timing pulley lock wrench (2 pieces) FGHJK
1 D887130833 Valve guide seal driving tool G
1 D887130844 Closing rocker half ring tool G
1 D887130847 Cam timing checking tool (Two tools) G
1 D887130862/120 Rocker pin extractor G
1 D887650882 Head nut spanner with 1/4" drive G
1 D887650998 Ignition pick up height tool G

Bevel Drive Desmo Shim Kit. (Own Box).
     
  Micrometer.  
  Valve lapping stick.  
  Valve lapping stick caps. ( 3 of.)  
  Valve lapping paste. ( Two grades.)  
  Set of feeler gauges.  
  Closing shim comparative measuring tool.  
  Closing rocker spring tool D887130143.  
  Rocker assembly pin tool D887130262.  
  Rocker pin puller tool D887130120.  
  Selection of opening shims.(126 opening shims as at 16/03/94)  
  Selection of closing shims.(80 closing shims as at 16/03/94)  
  Replacement Closing shim collets.  
  Information folder.  

Thread Repair Kits.
     
  6 mm x 1.0 mm6.3mm1/4"Drill  
  8 mm x 1.25 mm8.3mm21/64" Drill  
  10 mm x 1.5 mm10.4mm13/32" Drill  
  14 mm x 1.25 mm14.25 mm9/16"Drill  
  Ratchet tap holder  

Other Tools.
     
  Camshaft drive belt remover. (Pantah)  
  Countershaft seal Installation tool.  
  Head nut tensioning spanner 16 mm.  
  Crankcase separating tool. (In Box 1 tray)  
  36 mm socket 1/2" drive. (Primary drive gear)  
  30 mm socket 1/2" drive. (Clutch hub nut)  
  7 mm Hex key. (Front fork triple clamp new 750/900 SS)  
  10 mm Hex key. (Front fork tripple clamps) (In Box 1 tray)  
  12 mm Hex key. (Front fork filler cap) (In Box 1 tray)  
  14 mm Hex key. (Primary drive cover crankshaft access cap.) (In Box 1 tray)  
  Circlip pliers internal. (2) (In Box 1 tray)  
  Circlip pliers external. (2) (In Box 1 tray)  
  'O' ring chain joining link fitting tool.  
  Chain breaker.  
  Vacuum gauges (2 sets)  
  Timing light. (In own box)  
  Timing discs (Degree wheels) (2)  
  Magnetic Stand and Dial Gauge. (End float checking, Cam timing checking etc.)  
  Makita 1/2" Electric Impact Wrench (Rattle Gun for undoing very tight nuts / bolts etc) comes with impact sockets, 19, 22, 24, 30, 32, & 36 mm. Model 6905B Serial 177422E. And 3/8 drive 4, 5, 6, 7, 8 &10mm hex keys complete with adaptor 3/8 by 1/2.  
  Swingarm Eye Reamer with long Pilot Shaft and Cone.  
  Compression gauge (cylinder pressure test)  
  851 Workshop Manual (Factory original)  
  Micrometer  
  Selection of opening shims. (100+)  
  Selection of closing shims, old type. (100)  
  Selection of closing shims, new type. ( ?? )